(as of Mar 17,2021 12:57:16 UTC – Details)
Material: ABS Plastic
Style: Multifunctional & Detachable
Product dimension: 300*128*110mm/ 11.81” X 5.04” X 4.33”
Suggest max load:10kg/22.05lb
Package Weight: 0.49kg/1.08lb
Hair Dryer Holder *1
Organizer Caddy *1
Silicon Cable Strap *1
No-trace Tape *2
How to install
1.Clean and dry the wall
2.Fasten the stickers tightly in the buckles
3.Peel off the protective film
4. Press the stickers to position them
5. Take down product and press again the stickers to remove the internal air
6. Wait for 12 hours. Then hang the product back
How to Remove
This method is applicable for waterproof surfaces, such as glass, acrylic board, ceramic tile, porcelain tile, glazed tile, and plastic surface.
1.Drench the edge of the sticker with water.
2.Continue using water for wetting the sticky side to assist in peeling off.
This method is applicable for heat-resistant surfaces, such as wood, ceramic tile, porcelain tile, glazed tile and metal board surface.
1.Heat the sticker with hair dryer.
2.Peel it off.
1.Recommend to install on smooth and even surface. Please confirm if your wall is suitable before installation. Do not install on easy-peel-off surface suck as Lime Wall, Plaster Wall, Stucco Wall, Wallpaper Wall. Don’t install over the Grout Lines.
2.Wait for 12 Hours before hanging items. Do not hang overweight 10kg/22.05lb and dangerous fragile items.
3.Last picture in the listing shows you how to install and remove. Be sure to follow ALL steps to install.
4.Installation videos: you can search for „Non-trace Sticker Product Instruction“ on YOUTUBE to watch the videos.
5.If you have any questions, feel free to contact us.
★Multifunctional Organizer: 80MM diameter on blow dryer holder’s top is suitable for most hair dryers, also a plug slot and silicon cable strap for efficient storage. Storage caddy can tidy up your hair care items such as hair oil, hair spray, brush, comb.
★Superior Carry Weight & Back-up Sticker: Mounted with 10KG-supported NO TRACE STICKER. Wait for 12H after installation. A back-up sticker is included for relocation and longer service time.
★Detachable & No Water Pooling : This blow dryer holder can be detached for convenient cleaning. Designed to not allow trapped water to remain with drain underneath the storage caddy.
★Easy Installation & Note: No drills and tools required. Ideal for attaching to smooth and even surface, like cabinet door, mirrors, metal board, porcelain tile, glazed tile, ceramic tile etc. Please DON’T install on easy-peel-off surface such as Lime Wall, Plaster Wall, Stucco Wall and Wallpapered Wall.
★Durable & Reliable: Made of top quality ABS material resists rust, daily scratch and discoloration, ensures excellent heat-bearing performance. No toxicity and smell.